News And Advice

Advice, insights and news from our team.

Hiring Forklift Operators: Addressing the Shortage and Retention Challenges

Picture a Tuesday at a distribution center in the middle of a seasonal ramp. One of the reach trucks on the inbound side sits parked because its regular operator called out, and nobody else on the shift is cleared to take the seat. Pallets back up at the dock doors, pickers walk longer routes to cover the gap, and by mid-afternoon the supervisor is trading safety checks against the outbound cutoff. If you run operations or manage a dock, you have probably lived some version of this. This article covers why the gap keeps reappearing and how to hire forklift operators fast enough to close it without repeating last season’s mistakes. Practitioners in this field often find that understanding the local labor market is crucial for effective hiring.

Why the forklift operator shortage is hitting warehouses so hard

The shortage is not one problem. It is several pressures that stack on top of each other. Experienced operators are retiring, and many of the people who learned the trade in the 1990s and 2000s are not being replaced at the same rate by younger workers who see forklift work as physically demanding and tied to rotating shifts. At the same time, new warehouse and distribution space along the East Coast corridors keeps pulling from the same local labor pool, so a facility that once competed for operators against two or three other employers may now compete against a dozen.

Certification adds another layer. Operators must receive employer-provided training and a workplace evaluation before they run a powered industrial truck, and that process takes time that a short-staffed site rarely has. A worker who is willing but not yet certified cannot fill the seat on day one, which makes many sites treat operator hiring as a slow process by default. That delay is often what turns a manageable vacancy into a missed shipment.

Not every facility feels this equally. A site with steady volume and a long-tenured crew may only notice the shortage during peaks, while a high-turnover operation with heavy seasonal swings feels it every quarter. Knowing which situation you are in tells you how much of your effort should go into retention and how much into fast, certified backfill.

Who you are really recruiting

When job postings say “forklift operator wanted,” they tend to attract one type of applicant and miss the others. In practice, most employers draw from three groups, and each one needs a different pitch and a different path to the seat.

  • Experienced certified operators who already know how to run a counterbalance or reach truck and want predictable hours, a stable crew, and equipment that is maintained. They are the fastest to productivity but also the most selective about working conditions.

  • Newer trainees, often warehouse associates or pickers who have shown reliability on the floor and are ready to step up. They need a clear training timeline and a supervisor willing to evaluate them honestly.

  • Workers switching from adjacent roles, such as material handlers, production line workers, or drivers who already understand dock flow and safety rules. They usually need the shortest classroom time but the most attention to the specifics of your equipment and layout.

Consider a hypothetical scenario. A night-shift supervisor at a regional distributor posts for experienced operators, gets two applicants in three weeks, and assumes the market is empty. A few weeks later, a receiving clerk who has watched the dock for two years asks whether the company would train her. The supervisor who treats her as a trainee instead of a non-candidate has a seat filled by the end of the month. The pool was there. The posting simply did not describe the job in terms she could recognize.

How to hire forklift operators without lowering the bar

Speed and safety are not opposites, but they do require deliberate choices. The employers who fill operator seats consistently tend to make four moves at once: they price the role realistically, they design shifts people can sustain, they build training into the first week, and they show workers where the job can lead. Each of these is worth examining on its own.

Position pay against the local market

Start by checking what comparable operator roles pay within your commuting area, not what your company paid three years ago. Candidates compare offers quickly, and a posting that sits below nearby employers will be skipped regardless of how good the benefits look on paper. Pay should also reflect the certification level you are asking for. A posted rate that does not distinguish between a certified operator and a trainee signals that you have not thought through the role.

Raising wages across the board is expensive, and it does not fix a bad shift pattern. Treat pay as one lever among several, not the entire strategy. A modest increase paired with a stable schedule often outperforms a larger increase attached to constant overtime.

Design shifts people can sustain

Operator turnover often follows scheduling more closely than it follows pay. Rotating shifts that change every week, mandatory overtime with short notice, and split coverage that leaves one operator running two trucks all push experienced people out. If your peak demand is seasonal, consider a defined surge schedule with advance notice, and make clear to candidates which weeks will require extra hours before they accept the offer.

Shift design also affects how quickly new hires settle in. A trainee who is scheduled alongside a steady, certified operator for the first two weeks learns faster and is less likely to leave than one who is placed on an unfamiliar shift with no one to ask.

Build training into the first week

Certification is a requirement, not a hiring strategy. The stronger approach is to plan training as part of onboarding: confirm the candidate’s prior experience, schedule the required training and evaluation before the first solo shift, and assign a named mentor for the early weeks. This will slow down the first week’s output somewhat. That trade-off is real, and it is usually smaller than the cost of an unqualified operator running a truck in a congested aisle.

Pair this with a clear checklist of what the operator is expected to know by day ten and day thirty. Specific expectations reduce the guessing that leads new hires to decide the job is not for them. For a broader view of what makes new hires stay past the first few weeks, our piece on the 5 keys to job success covers the habits and expectations that tend to matter most.

Make advancement visible

Many operators would stay longer if they could see a next step. A path from trainee to certified operator, from operator to lead or trainer, or from a single-shift role to cross-training on multiple equipment types gives people a reason to commit. Post these paths in the job description and mention them during interviews. Workers respond to specifics, such as the time it takes to move to a lead role and what that role pays, far more than to general statements about growth. If you want a useful reference for how workers approach this from their side, our guide on proven methods for how to get a promotion outlines what supervisors tend to look for.

How Axiom Staffing Group fills operator roles

Axiom Staffing Group places forklift-qualified operators alongside warehouse support, production, and call center staff, mainly for employers with seasonal demand spikes or tight deadlines. Screening for operator roles goes beyond checking certification paperwork. Recruiters look at attendance patterns, how candidates describe their safety habits, and whether they have stayed in comparable roles long enough to show reliability. Temporary, temp-to-hire, and direct hire arrangements are all available, so you can match the placement model to how long you expect the need to last.

The screening process has limits. A candidate can pass every check and still struggle with a specific piece of equipment or a particular dock layout, which is why we recommend a short on-site orientation for every new operator, regardless of experience. Staffing cannot replace the training your own supervisors provide, but it can narrow the field to people who are likely to use that training well.

Preparing Your Customer Support Team for What’s Next

Start by listing every operator seat on your floor, including the ones that are covered by overtime, and note which ones depend on a single person. Those are the seats most likely to become emergencies. Next, check your posted pay against the local market, write the shift pattern into the job description, and decide in advance which trainee path you will offer. Doing this work six to eight weeks before a known surge gives you room to interview, train, and place people without rushing the screening.

If you are planning for the next peak and want to talk through staffing options for your operator roles, contact Axiom Staffing Group to start the conversation. A short call is enough to describe your equipment, shift structure, and timeline, and to see whether temporary, temp-to-hire, or direct hire fits the gap you are trying to close.

Contact us today

Facebook
Twitter
LinkedIn
Email